Determination of pollutants, antibiotics, and drugs in surface water in Italy as required by the third EU Water Framework Directive Watch List: method development, validation, and assessment.

In this paper, we report a study concerning the quantification of new emerging pollutants in water as a request from the third European Watch List mechanism. The EU Watch List compound was investigated by an internal method that was validated in terms of detection limits, linearities, accuracy, and precision in accordance with quality assurance criteria, and it was used to monitor several rivers from 11 Italian regions. The methodology developed was satisfactorily validated from 5 to 500 ng L-1 for the emerging pollutants studied, and it was applied to different river waters sampled in Italy, revealing the presence of drugs and antibiotics. Rivers were monitored for 2 years by two different campaigns conducted in 2021 and 2022. A total of 19 emerging pollutants were investigated on 45 samples. The most detected analytes were O-desmethylvenlafaxine and venlafaxine. About azole compounds, sulfamethoxazole, fluconazole, and Miconazole were found. About antibiotics, ciprofloxacin and amoxicillin were found in three and one samples, respectively. Moreover, statistical analyses have found a significant correlation between O-desmethylvenlafaxine with venlafaxine, sulfamethoxazole with venlafaxine, and fluconazole with venlafaxine.

Water Quality, Heavy Metals, and Antifungal Susceptibility to Fluconazole of Yeasts from Water Systems.

Aquatic environments could be reservoirs of pathogenic yeasts with acquired antifungal resistance. The susceptibility to antifungal agents of yeasts present in the wastewater and natural waters of the city of Cali was evaluated. Samples were taken from two types of water: drinking water (Meléndez River, drinking water treatment plant "Puerto Mallarino" in the Cauca River) and wastewater (South Channel of the Cauca River, "Cañaveralejo-PTAR" wastewater treatment plant). Physico-chemical parameters, heavy metal concentration, and yeast levels were determined using standard procedures. Yeasts were identified using API 20 C AUX (BioMérieux) and sequence analysis of the ITS1-5.8S-ITS2 and D1/D2 regions of the large subunit of the ribosome. Susceptibility assays against fluconazole and amphotericin B using the minimum inhibitory concentration (MIC) test were determined using the microdilution method. The influence of physico-chemical parameters and heavy metals was established using principal component analysis (PCA). Yeast counts were higher at WWTP "PTAR" and lower at Melendez River, as expected. A total of 14 genera and 21 yeast species was identified, and the genus Candida was present at all locations. Susceptibility tests showed a 32.7% resistance profile to fluconazole in the order DWTP "Puerto Mallarino = WWTP "PTAR" > South Channel "Navarro". There were significant differences (p < 0.05) in the physico-chemical parameters/concentration of heavy metals and yeast levels between the aquatic systems under study. A positive association was observed between yeast levels and total dissolved solids, nitrate levels, and Cr at the "PTAR" WWTP; conductivity, Zn, and Cu in the South Channel; and the presence of Pb in the "Puerto Mallarino" DWTP. Rhodotorula mucilaginosa, Candida albicans, and Candida sp. 1 were influenced by Cr and Cd, and Diutina catelunata was influenced by Fe (p < 0.05). The water systems explored in this study showed different yeast levels and susceptibility profiles, and, therefore, possible genetic differences among populations of the same species, and different physico-chemical and heavy metals concentrations, which were probably modulating the antifungal-resistant yeasts. All these aquatic systems discharge their content into the Cauca River. We highlight the importance to further investigate if these resistant communities continue to other locations in the second largest river of Colombia and to determine the risk posed to humans and animals.

Dissipation dynamics and comparative dietary exposure assessment of mefentrifluconazole in rice.

A fast and sensitive analytical method based on UHPLC coupled with tandem mass spectrometry was established to investigate the dissipation and final residual amounts of mefentrifluconazole in rice, and dietary risk to consumers was evaluated. The method provided good linearity (R2 ≥ 0.9979), accuracy (recovery range, 79.0-101.5%), precision (relative standard deviation range, 1.3-13.9%), and sensitivity (limit of quantification, 0.005 mg/kg). The dissipation dynamics of mefentrifluconazole in rice followed first-order kinetics, with half-lives of 2.8-16.6 days. The final residues of mefentrifluconazole in various samples of harvested brown rice ranged from less than the limit of quantification to 0.092 mg/kg, the latter value being higher than the maximum residue limit recommended by the European Union. Comparative dietary exposure of mefentrifluconazole was assessed using field data and Chinese dietary patterns for different genders, regions, and age data. Although the results showed acceptable levels of risk for both acute exposure (the percentage of the acute reference dose ≤ 0.7483%) and chronic dietary intake (the percentage of acceptable daily intake ≤ 31.8516%), more studies of children are needed because they are at higher risk than other groups. This work provides the necessary data for registering and establishing the maximum residue limit for mefentrifluconazole in rice in China and reveals the potential risks to different groups of long-term application of mefentrifluconazole to rice and other crops.

Implementation of HILIC-UV technique for the determination of moxifloxacin and fluconazole in raw materials and pharmaceutical eye gel.

Hydrophilic interaction liquid chromatography (HILIC) has inherent merits over RP-HPLC in the analyzing of hydrophilic substances. Accordingly, an innovative HILIC-UV methodology is proposed for the simultaneous estimation of ethyl paraben (PRN), fluconazole (FLZ) and moxifloxacin hydrochloride (MOX) in raw materials and pharmaceutical eye gel. The separation process was conducted using Waters XBridge™ HILIC column (100 mm × 4.6 mm, 3.5 µm particle size) at room temperature. Isocratic mobile phase containing acetonitrile: 0.1% triethylamine buffer (90:10, v/v, pH 5.0), was pumped at flow rate 1.0 mL/min and detected at 260 nm. Under these optimized conditions, PRN, FLZ and MOX showed rectilinear relationships with the concentration ranges (0.5-6.0), (5.0-50.0) and (5.0-60.0) µg/mL, respectively. The developed method offered at least fivefold increase in sensitivity within shorter time than the reported methods. Three greenness assessment tools namely: Analytical eco-scale, GAPI and AGREE were exploited to investigate the method's impact on the environment and conduct a comparative study with the reported methods. International council of Harmonization (ICH) guidelines have been followed to calculate validation parameters. The statistical comparison between results of the suggested method and the comparison method showed no discrepancy confirming accuracy of the method.

Comparator product issues for biowaiver implementation: the case of Fluconazole

The aim of this work was to assess if the commercially available Fluconazole drug products (Reference, Generic and Similar) would meet the biowaiver criteria from Food and Drug Administration (FDA) and Brazilian Agency for Health Surveillance (ANVISA) agencies. All formulations were evaluated considering the dissolution profile carried out in Simulated Gastric Fluid (SGF) pH 1.2, Acetate Buffer (AB) pH 4.5 and Simulated Intestinal Fluid (SIF) pH 6.8. The results demonstrated that all formulations fulfilled the 85% of drug dissolved at 30 min criterion in SGF pH 1.2. However, in AB pH 4.5 and SIF pH 6.8, some formulations, including the comparator, did not achieve this dissolution percentage. The discrepant dissolution profiles also failed the ƒ2 similarity factor analysis, since none of the formulations showed values between 50 and 100 in the three dissolution media. Comparative dissolution profiles were not similar, considering that the main issues concerning the dissolution were evidenced for the comparator product. Hence, a revision in the regulatory norms in order to establish criteria to switch the comparator could result in an increased application of drugs based on biowaiver criteria

Validation of an innovative analytical method for simultaneous quantification of curcumin and fluconazole using high-performance liquid chromatography from nanostructured lipid carriers.

Vulvovaginal candidiasis is a public health problem with a high incidence among female patients. Currently, there is an increase in the identification of Candida spp. resistant to current therapy, making it necessary to search for new therapeutic alternatives. The synergistic potential of curcumin with fluconazole is described in the literature. However, due to its high lipophilicity, it is necessary to use drug-delivery systems to adequately explore its potential, among which is the nanostructured lipid carrier. However, to date, there is no validated method of high-performance liquid chromatography for simultaneous determination of fluconazole and curcumin in the literature. Thus, the present work developed a high-performance liquid chromatography method for simultaneous determination of fluconazole and curcumin co-encapsulated in nanostructured lipid carrier which was validated according to the International Conference on Harmonization (Technical Requirements for Registration of Pharmaceuticals for Human Use) - Q2 (R1) and the Food and Drug Administration - Guidance for Bioanalytical Method. The method was applied to determine the encapsulation efficiency and drug-loading of curcumin and fluconazole in nanostructured lipid carriers. The developed method proved to be selective, precise, accurate, and robust for the simultaneous determination of both drugs, enabling the quantification of encapsulation efficiency and drug-loading of curcumin and fluconazole in nanostructured lipid carriers.

Detection Method of Falsified Medicines by Using a Low-Cost Raman Scattering Spectrometer Combined with Soft Independent Modeling of Class Analogy and Partial Least Squares Discriminant Analysis.

There are many reports of falsified medicines that may cause harm to patients. A rapid and simple method of identifying falsified medicines that could be used in the field is required. Although Raman scattering spectroscopy has become popular as a non-destructive analysis, few validation experiments on falsified medicines that are actually distributed on the market have been conducted. In this study, we validated a discriminant analysis using an ultra-compact, portable, and low-cost Raman scattering spectrometer combined with multivariate analysis. The medicines were three types of erectile dysfunction therapeutic tablet and one type of antifungal tablet: tadalafil (Cialis), vardenafil hydrochloride (Levitra), sildenafil citrate (Viagra), and fluconazole (Diflucan), which is sometimes advertised as female Viagra. For each medicine, the authentic standard product and products obtained by personal import via the internet (genuine or falsified) were used. Discriminant analyses were performed on the Raman spectra combined with soft independent modeling of class analogy (SIMCA) and partial least squares discriminant analysis (PLS-DA). It was possible to identify all falsified samples by SIMCA using the standard product model for all four products. Using the PLS-DA using the PLS models of the four standard products, falsified Levitra and Diflucan samples were classified correctly, although some falsified Cialis and all Viagra samples also belonged to the standard class. In this study, SIMCA might be more suitable than PLS-DA for identifying falsified medicines. A spectroscopic module that combines the low-cost Raman scattering spectroscopy with SIMCA might contribute to the rapid identification of falsified medicines in the field.

A fast and sensitive ultra-high-performance liquid chromatography-tandem mass spectrometry method for determining mefentrifluconazole in plant- and animal-derived foods.

A rapid and sensitive ultra-high-performance liquid chromatography-tandem mass spectrometry method, in conjunction with multiwalled carbon nanotube purification, was developed to determine the mefentrifluconazole levels in grapes, cucumbers, tomatoes, peppers, wheat, maize, eggs, milk, pork, chicken, and fish. After purification, tandem mass spectrometry of mefentrifluconazole required <3.0 min. Matrix-matched external standard curves were used to quantify the residual mefentrifluconazole. The method meets the requirements of the European Union Document SANTE/11813/2017. Quantification was linear between 5 and 500 µg/kg (R2 ≥ 0.9988), and both the intra- and interday relative standard deviations were ≤13.7%. Analyte recovery ranged from 81.5% to 107.6%. The limit of mefentrifluconazole quantification was 5 µg/kg for all matrices. The method successfully detected and quantified mefentrifluconazole that had been applied to cucumbers and tomatoes grown in a test field. These results imply that the proposed method is effective and reliable for detecting mefentrifluconazole residues in plant- and animal-derived foods.

Photogeneration of hydroxyl radical in Fe(III)-citrate-oxalate system for the degradation of fluconazole: mechanism and products.

The photochemical role of Fe(III)-citrate complex is significant in natural waters due to its ubiquitous existence and excellent photoreactivity at near neutral pH. Although there are many reports on the photoinduced degradation of pollutants in the Fe(III)-citrate system, the optimum pH for its photoreactivity is yet not clearly understood. Here, for the first time, we demonstrated that the optimum pH was 5.5 for the photoproduction of •OH in the Fe(III)-citrate system via kinetics modeling based on the steady-state approximation. According to the experimental results, the •OH photoproduction increased with increasing pH until 5.5 and then decreased in Fe(III)-citrate solution, which agreed well with the prediction trend of kinetic modeling. The effect of the common ligand oxalate on the photoreactivity of Fe(III)-citrate system was also investigated. The addition of oxalate promoted the photoproduction of •OH in Fe(III)-citrate solutions, and the measured [•OH]ss increased with oxalate concentration under a fixed Fe(III)-to-citrate ratio. Little synergistic effect exists in Fe(III)-citrate-oxalate system at pH 4.0-5.5. In contrast, an appreciable synergistic effect was observed at near neutral pH (6.0-8.0). Higher oxalate-to-citrate ratio facilitated the synergistic effect. Furthermore, antifungal drug fluconazole could be removed efficiently in the Fe(III)-citrate-oxalate system. The photodegradation kinetics also verified the optimum pH of Fe(III)-citrate system and synergistic effect of oxalate. By LC-ESI-MS/MS analyses, the photoproducts of fluconazole in the Fe(III)-citrate-oxalate system were identified and the reaction mechanism involving hydroxylation substitution and subsequent cleavage of heterocyclic amine was proposed. These findings suggest that Fe(III)-citrate exhibits best photoreactivity at pH 5.5, and the coexistence of reactive ligands will enhance its photoreactivity at circumneutral pH, indicating potential application in wastewater treatment via addition of appropriate citrate and co-ligands.

A porous graphitized carbon LC-ESI/MS method for the quantitation of metronidazole and fluconazole in breast milk and human plasma.

Information on drug transfer into the breast milk is essential to protect the infant from undesirable adverse effects of maternal consumption of drugs and to allow effective pharmacological treatment of breastfeeding mothers. Metronidazole and fluconazole are two drugs frequently used in nursing women to treat various infections, thus questioning infant's safety due to drug exposure through breast milk. In this article a porous graphitized carbon LC/ESI-MS assay was developed for the quantitation of metronidazole and fluconazole in breast milk and human plasma. The assay was based on the use of 150 µL of biological samples, following acetonitrile precipitation of proteins and filtration that enabled injection into the LC/ESI-MS system. All analytes and the internal standard, ropinirole, were separated by using a porous graphitized carbon analytical column (150 × 2.1 mm i.d., particle size 5 µm) with isocratic elution. The mobile phase consists of 55% acetonitrile in water acidified with 0.1% concentrated formic acid and pumped at a flow rate of 0.25 mL min-1. The assay was linear over a concentration range of 0.1 to 15 µg mL-1 for all analytes in both biological samples. Intermediate precision was found to be <8.4% over the tested concentration ranges. A run time of <5 min for each sample made it possible to analyze a large number of biological samples per day. The method is the first reported application for the analysis of metronidazole and fluconazole in both breast milk and human plasma and it can be used to support a wide range of clinical studies.

Identificación molecular y sensibilidad a los antifúngicos de aislamientos de sangre del complejo Candida parapsilosis en Venezuela / Molecular identification and in vitro antifungal susceptibility of blood isolates of the Candida parapsilosis species complex in Venezuela

Antecedentes. Candida parapsilosis constituye un complejo de especies formado por Candida parapsilosis sensu stricto, Candida orthopsilosis y Candida metapsilosis. Estudios a nivel mundial han descrito su epidemiología y sensibilidad a los antifúngicos. Objetivos. Los objetivos de este trabajo fueron identificar molecularmente aislamientos de sangre del complejo Candida parapsilosis y determinar su sensibilidad in vitro a los antifúngicos de uso sistémico. Métodos. Se estudiaron 86 aislamientos del complejo C. parapsilosis, provenientes de la Red de Vigilancia de Candidemia del Departamento de Micología del Instituto Nacional de Higiene Rafael Rangel, recogidos en el periodo 2008-2011. Se realizó la amplificación del gen de la deshidrogenasa alcohólica secundaria por reacción en cadena de la polimerasa y los productos fueron analizados mediante los polimorfismos de la longitud de sus fragmentos de restricción, mediante el uso de la enzima BanI. Las pruebas de sensibilidad se realizaron mediante Etest® según las instrucciones del fabricante, con modificaciones. Resultados. De los 86 aislamientos estudiados, 81 (94,2%) fueron C. parapsilosis sensu stricto, 4 (4,6%) C. orthopsilosis y uno (1,2%) C. metapsilosis. C. parapsilosis fue sensible a la anfotericina B y la caspofungina, y su porcentaje de resistencia al fluconazol y el voriconazol fue bajo. C. orthopsilosis y C. metapsilosis fueron sensibles a todos los antifúngicos probados. Conclusiones. Los resultados aportaron por primera vez en Venezuela información importante sobre la distribución del complejo C. parapsilosis en casos de candidemia, y apoyan la necesidad de continuar con los programas de vigilancia, incluyendo la discriminación molecular de las especies y las pruebas de sensibilidad a los antifúngicos, que permitirán orientar la terapia específica (AU)

Background. Candida parapsilosis is a species complex consisting of Candida parapsilosis sensu stricto, Candida orthopsilosis, and Candida metapsilosis. Studies worldwide have described its epidemiology and susceptibility to antifungal agents. Aims. The aims of this study were to carry out the molecular identification of blood isolates belonging to the Candida parapsilosis species complex, and to determine their in vitro susceptibility to antifungals of systemic use. Methods. A study of 86 strains of C. parapsilosis species complex collected in 2008-2011 and obtained from the Candidaemia Surveillance Network of Mycology Department of the Rafael Rangel National Institute of Hygiene, was made. Secondary alcohol-dehydrogenase gene amplification was performed using polymerase chain reaction, and the products were analysed by restriction fragments length polymorphisms using the enzyme BanI. Susceptibility tests were performed using Etest®, following the manufacturer's instructions with modifications. Results. Of the 86 isolates studied, 81 (94.2%) were C. parapsilosis sensu stricto, 4 (4.6%) C. orthopsilosis, and one (1.2%) C. metapsilosis. C. parapsilosis isolates were susceptible to amphotericin B and caspofungin, showing low rates of resistance to fluconazole and voriconazole. C. orthopsilosis and C. metapsilosis were susceptible to all the antifungals tested. Conclusions. The results obtained in Venezuela provide for the first time important information about the distribution of C. parapsilosis species complex in cases of candidaemia, and support the need for continuing surveillance programs, including molecular discrimination of species and antifungal susceptibility tests, which may guide specific therapy (AU)

Fluconazole-containing agar Sabouraud dextrose plates are not useful when screening for susceptibility in Candida albicans / Las placas de agar dextrosado de Sabouraud con fluconazol no son útiles para la detección de resistencia en Candida albicans

Introduction. Fluconazole is an alternative for candidemic patients who are not critically ill. Fluconazole is mainly fungistatic and does not completely inhibit visual Candida albicans growth. We studied the usefulness of fluconazolecontaining Sabouraud dextrose agar plates for detecting susceptibility to fluconazole in C. albicans. Material and methods. Adjusted inocula of 19 isolates were transferred directly onto fluconazole-containing Sabouraud dextrose plates (concentrations ranging from 0.125 mg/L to 128 mg/L). The fluconazole MIC in fresh isolates and after growth on the fluconazole-containing plate at 128 mg/L was recorded following the EUCAST EDef 7.2 guidelines. Then isolates were classified according to their degree of trailing production, based on microdilution procedure. Results. All isolates were able to grow on all fluconazolecontaining plates, even those isolates susceptible to fluconazole. In fact, we selected isolates with different degrees of trailing based on microdilution procedures. 50% of isolates classified as heavy trailers, 35.71% as moderate trailers, and 14.28% as slight trailers. Conclusions. The use of fluconazole-containing Sabouraud dextrose agar plates was not a reliable method to detect fluconazole susceptibility in C. albicans isolates; growth of the isolates was a trailing effect rather than true resistance (AU)

Introducción. Fluconazol es el antifúngico de elección en pacientes con candidemia que no están en estado crítico. Fluconazol es un fármaco fungistático y no inhibe por completo el crecimiento de Candida albicans. En este estudio se evalúa la posibilidad de emplear placas de agar dextrosado de Sabouraud con diferentes concentraciones de fluconazol como método para evaluar la sensibilidad a este fármaco de aislados de C. albicans. Material y métodos. El inóculo ajustado procedente de 19 aislados de C. albicans se transfirió directamente a placas que contenían concentraciones de fluconazol comprendidas entre 0,125 mg/L y 128 mg/L. La CMI de fluconazol se calculó en los aislados originales y en los aislados crecidos en la placa de fluconazol de 128 mg/L, según el protocolo de EUCAST EDef 7.2. Los aislados se clasificaron según su grado de producción de efecto de arrastre, siguiendo el procedimiento de microdilución. Resultados. Todos los aislados fueron capaces de crecer en todas las placas con diferentes concentraciones de fluconazol, incluso las cepas sensibles. Los aislados mostraron diferentes grados de efecto de arrastre. El 50% de los aislados se clasificaron como altamente productores, el 35,71% como moderadamente productores y el 14,28% como poco productores de efecto de arrastre. Conclusión. El uso de placas de agar dextrosado de Sabouraud con fluconazol no demostró ser un método útil para el estudio de la sensibilidad de C. albicans a este fármaco ya que el crecimiento de los aislados fue interpretado como efecto de arrastre y no como una verdadera resistencia (AU)

Utilizing online-dual-SPE-LC with HRMS for the simultaneous quantification of amphotericin B, fluconazole, and fluorocytosine in human plasma and cerebrospinal fluid.

Amphotericin B (AMB), fluconazole (FZ), and fluorocytosine (FC) are recommended for HIV-associated cryptococcal meningitis (CM) patients as preferred antibiotics. This study presents a fast and automated online-dual-solid phase extraction (SPE)-LC coupled with high resolution mass spectrometer (HRMS) method to simultaneously measure the concentrations of AMB, FZ, and FC in human plasma and cerebrospinal fluid (CSF). Automated sample clean-up was performed on the human plasma and CSF samples with stop-flow heart-cutting two dimensional (2D) separation using a online-dual-SPE system, allowing retention and accumulation of AMB, FZ, and carbamazepine (CBZ, Internal standard (IS)) by the Oasis®HLB cartridge, and retention and accumulation of FC and 5-methylcytosine hydrochloride (MC, IS) by the HyperSep Hypercarb cartridge respectively. Followed by LC elution, quantification by Q-Exactive Hybrid Quadrupole-Orbitrap with targeted-selected ion monitoring (t-SIM) mode was applied to simultaneously determine the concentrations of AMB, FZ and FC. The bioanalysis was achieved in a total running time of 7min. The method was fully validated according to FDA guidelines. The lowest limit of quantification (LLOQ) was 0.04, 0.04, and 0.40µgmL-1 for AMB, FZ, and FC, respectively. AMB, FZ, and FC levels were linear in the ranges of 0.04-2.00µgmL-1, 0.04-2.00µgmL-1 and 0.40-20.00µgmL-1, respectively. The method showed good performance for human plasma and CSF samples with linearity (R2>0.99), intra-day and inter-day precision (relative standard deviation, RSD<4.32% and <4.06%, respectively), recovery (89.93-93.28% and 90.09-93.58%, respectively) and matrix effect (96.35-103.78% and 92.32-101.48%, respectively). The validated method was successfully applied in real samples of Chinese patients. Overall, our results indicate that this fully automated, sensitive, and reliable online-dual-SPE-LC-HRMS method is effective for therapeutic drug monitoring (TDM) of AMB, FZ, and FC levels.

Epidemiología, factores de riesgo y sensibilidad in vitro en candidemias por especies diferentes de Candida albicans / Epidemiology, risk factors and in vitro susceptibility in candidaemia due to non-Candida albicans species

Antecedentes. La infección fúngica invasora ha aumentado en los últimos años por el incremento de los factores de riesgo; la candidemia es la principal manifestación clínica. Candida albicans es la especie más frecuente, aunque actualmente se ha observado un aumento en otras especies del género. Objetivos. Analizar la epidemiología, los factores de riesgo y la sensibilidad antifúngica de los aislamientos en hemocultivos de especies de Candida diferentes de C.albicans en nuestro hospital en los últimos 12años. Métodos. Se estudiaron retrospectivamente las características epidemiológicas de 107 pacientes con candidemia ingresados en nuestro hospital. Se determinó la sensibilidad de las especies de Candida al fluconazol, el itraconazol, el voriconazol, la anfotericinaB, la 5-fluorocitosina, la caspofungina, la micafungina y la anidulafungina mediante el método de microdilución Sensititre Yeast One (Izasa, España). Resultados. De los 109 aislamientos, 59 correspondieron a las siguientes especies de Candida (diferentes de C.albicans): 25 Candida parapsilosis complex, 14 Candida glabrata complex, 13 Candida tropicalis, 4 Candida krusei, una Candida lipolytica, una Candida membranaefaciens y una Candida pulcherrima. El factor de riesgo más frecuente en adultos y niños con candidemias por estas especies fue ser portador de catéter. El 8,5% de estos aislamientos fueron resistentes al fluconazol. Conclusiones. El resultado de nuestro trabajo confirma la necesidad de conocer la epidemiología de las especies de Candida diferentes de C.albicans, su sensibilidad in vitro y los factores de riesgo asociados, especialmente en pacientes con dichos factores (AU)

Background. Invasive fungal infection (IFI) has increased in recent years due to there being a greater number of risk factors. IFI caused by Candida is the most frequent, and although Candida albicans is the most isolated species, there is currently a decrease of C. albicans and an increase of other species of the genus. Aims. To analyse the epidemiology, risk factors, and antifungal susceptibility of blood culture isolates of non-C.albicans Candida species in our hospital in the last 12years. Methods. A retrospective study was conducted on 107 patients with candidaemia admitted to our hospital. Candida isolates susceptibility to fluconazole, itraconazole, voriconazole, amphotericinB, 5-fluorocytosine, caspofungin, micafungin, and anidulafungin was determined by means of a microdilution technique (Sensititre Yeast One; Izasa, Spain). Results. From a total of 109 strains, 59 belonged to non-C. albicans Candida species: 25 Candida parapsilosis complex, 14 Candida glabrata complex, 13 Candida tropicalis, 4 Candida krusei, 1 Candida lipolytica, 1 Candida membranaefaciens, and 1 Candida pulcherrima. The most common risk factor in adults and children was catheter use. It was observed that 8.5% of those non-C.albicans strains were resistant to fluconazole. Conclusions. The results of this work confirm that it is necessary to know the epidemiology of non-C.albicans Candida species, the in vitro susceptibility of the species involved, and the main risk factors, especially in patients with predisposing conditions (AU)

Unbound fraction of fluconazole and linezolid in human plasma as determined by ultrafiltration: Impact of membrane type.

Ultrafiltration is a rapid and convenient method to determine the free concentrations of drugs in plasma. Several ultrafiltration devices based on Eppendorf cups are commercially available, but are not validated for such use by the manufacturer. Plasma pH, temperature and relative centrifugal force as well as membrane type can influence the results. In the present work, we developed an ultrafiltration method in order to determine the free concentrations of linezolid or fluconazole, both neutral and moderately lipophilic antiinfective drugs for parenteral as well as oral administration, in plasma of patients. Whereas both substances behaved relatively insensitive in human plasma regarding variations in pH (7.0-8.5), temperature (5-37°C) or relative centrifugal force (1000-10.000xg), losses of linezolid were observed with the Nanosep Omega device due to adsorption onto the polyethersulfone membrane (unbound fraction 75% at 100mg/L and 45% at 0.1mg/L, respectively). No losses were observed with Vivacon which is equipped with a membrane of regenerated cellulose. With fluconazole no differences between Nanosep and Vivacon were observed. Applying standard conditions (pH 7.4/37°C/1000xg/20min), the mean unbound fraction of linezolid in pooled plasma from healthy volunteers was 81.5±2.8% using Vivacon, that of fluconazole was 87.9±3.5% using Nanosep or 89.4±3.3% using Vivacon. The unbound fraction of linezolid was 85.4±3.7% in plasma samples from surgical patients and 92.1±6.2% in ICU patients, respectively. The unbound fraction of fluconazole was 93.9±3.3% in plasma samples from ICU patients.

Phytotoxicity of wastewater-born micropollutants--Characterisation of three antimycotics and a cationic surfactant.

Sewage sludge applied to soil may be a valuable fertiliser but can also introduce poorly degradable and highly adsorptive wastewater-born residues of pharmaceuticals and personal care products (PPCPs) to the soil, posing a potential risk to the receiving environment. Three azole antimycotics (climbazole, ketoconazole and fluconazole), and one quaternary ammonium compound (benzyldimethyldodecylammonium chloride, BDDA) that are frequently detected in municipal sewage sludge and/or treated wastewater were therefore characterised in their toxicity toward terrestrial (Brassica napus) and aquatic (Lemna minor) plants. Fluconazole and climbazole showed the greatest toxicity to B. napus, while toxicity of ketoconazole and BDDA was by one to two orders of magnitude lower. Sludge amendment to soil at an agriculturally realistic rate of 5 t/ha significantly reduced the bioconcentration of BDDA in B. napus shoots compared to tests without sludge amendment, although not significantly reducing phytotoxicity. Ketoconazole, fluconazole and BDDA proved to be very toxic to L. minor with median effective concentrations ranging from 55.7 µg/L to 969 µg/L. In aquatic as well as terrestrial plants, the investigated azoles exhibited growth-retarding symptoms presumably related to an interference with phytohormone synthesis as known for structurally similar fungicides used in agriculture. While all four substances exhibited considerable phytotoxicity, the effective concentrations were at least one order of magnitude higher than concentrations measured in sewage sludge and effluent. Based on preliminary hazard quotients, BDDA and climbazole appeared to be of greater environmental concern than the two pharmaceuticals fluconazole and ketoconazole.

Influence of sustained low-efficiency diafiltration (SLED-f) on interstitial fluid concentrations of fluconazole in a critically ill patient: Use of microdialysis.

Acute kidney injury is a common complication in critically ill patients, and hybrid techniques including sustained low-efficiency dialysis/diafiltration (SLED-f) are being increasingly utilised in intensive care units. Most fungal infections occur in the interstitial fluid (ISF) of tissues and successful treatment of a fungal infection relies on the ability of an antifungal agent to achieve adequate concentrations at the site of infection. Tissue distribution of antimicrobials is impaired in critically ill patients owing to a variety of disease-related physiological changes, e.g. sepsis. Fluconazole is a widely used antifungal agent used to treat Candida spp. infections in critically ill patients. The implications for ISF concentrations of enhanced elimination during renal replacement therapy have not yet been reported for fluconazole. The aim of this single-patient case report was to describe the influence of SLED-f on subcutaneous (SC) ISF concentrations of fluconazole and the implications for achieving pharmacokinetic/pharmacodynamic targets. Serial blood and ISF samples were collected at pre- and post-filter ports within the SLED-f circuit and subcutaneously inserted microdialysis probe, respectively. Fluconazole concentrations were measured using a validated chromatography method. The SC ISF-to-plasma partition coefficient of fluconazole in this patient was 0.91, indicating rapid equilibrium. SC ISF fluconazole concentrations consistently decreased after initiating SLED-f. The majority of the fluconazole was eliminated from the SC ISF as a result of redistribution. Considering the extensive tissue re-distribution of fluconazole and observed elimination from tissue compartments, higher doses may be required to treat deep-seated fungal infections.

Molecularly imprinted solid phase extraction of fluconazole from pharmaceutical formulations.

This work encompasses a direct and coherent strategy to synthesise a molecularly imprinted polymer (MIP) capable of extracting fluconazole from its sample. The MIP was successfully prepared from methacrylic acid (functional monomer), ethyleneglycoldimethacrylate (crosslinker) and acetonitrile (porogenic solvent) in the presence of fluconazole as the template molecule through a non-covalent approach. The non-imprinted polymer (NIP) was prepared following the same synthetic scheme, but in the absence of the template. The data obtained from scanning electronic microscopy, infrared spectroscopy, thermogravimetric and nitrogen Brunauer-Emmett-Teller plot helped to elucidate the structural as well as the morphological characteristics of the MIP and NIP. The application of MIP as a sorbent was demonstrated by packing it in solid phase extraction cartridges to extract fluconazole from commercial capsule samples through an offline analytical procedure. The quantification of fluconazole was accomplished through UPLC-MS, which resulted in LOD≤1.63×10(-10) mM. Furthermore, a high percentage recovery of 91±10% (n=9) was obtained. The ability of the MIP for selective recognition of fluconazole was evaluated by comparison with the structural analogues, miconazole, tioconazole and secnidazole, resulting in percentage recoveries of 51, 35 and 32%, respectively.

Detection and quantification of fluconazole within Candida glabrata biofilms.

Candida infections are often associated with biofilms and consequent high resistance to most common drugs (e.g. azoles). These resistance mechanisms are not only associated with the biofilm yeast physiology, but also with the presence of a diffusional barrier imposed by the biofilm matrix; however, the real biochemical role of the biofilm components remains very unclear. So, in order to further clarify this issue, we intend to determine, for the first time, fluconazole in biofilms within both supernatants and matrices. Candida biofilms were formed in the presence of fluconazole, and it was recovered from both supernatant and matrix cell-free fractions. Then, high-pressure liquid chromatography was used to identify and quantify the amount of drug that was present in the two fractions. Moreover, this study also showed that the presence of fluconazole in both fractions indicated that the drug administrated did not completely reach the cells, so this phenomena can easily be associated with lower biofilm susceptibility, since the drug administered did not completely reach the cells.

Triclosan as a surrogate for household biocides: an investigation into biocides in aquatic environments of a highly urbanized region.

Biocides are widely formulated in household and personal care products. We investigated the distribution and ecological risks of 16 household biocides in aquatic environments of a highly urbanized region in South China, evaluated triclosan as a chemical indicator for this group of household chemicals, and proposed a novel approach to predict the environmental occurrence and fate of these household biocides by using triclosan usage data and a level-III fugacity model. Eleven biocides were quantitatively detected at concentrations up to 264 ± 15.3 ng/L for climbazole in surface water, and up to 5649 ± 748 ng/g for triclocarban in sediment of four rivers in the region. The distribution of biocides in the aquatic environments was significantly correlated with environmental variables such as total nitrogen, total phosphorus and population. Domestic sewage in the region was the dominant pollution source for most biocides such as azole fungicides (fluconazole, climbazole, clotrimazole, ketoconazole, miconazole, and carbendazim) and disinfectants (triclosan and triclocarban). Preliminary risk assessment showed high ecological risks posed by two biocides carbendazim and triclosan in river waters. Mostly important, triclosan was found to be a reliable chemical indicator to surrogate household biocides both in water and sediment based on the correlation analysis. In addition, the fugacity modeling could provide simulated concentrations comparable to the monitoring results. Therefore, with the usage data of the chemical indicator triclosan and correlation formula with other biocides, this model can be applied for predicting the occurrence and fate of various household biocides in a catchment.